- Products
- / Watering units
For optimal crop growth, it's essential that the plant has access to nutrient water with the correct balance of elements, the right EC, and the appropriate pH.
For this purpose, InFa Techniek a number of watering units, including:
PRODUCTS - Water Treatment Equipment
AquaMix Substrate Unit
The AquaMix substrate unit operates with a mixing tank for precise EC and pH control, as well as efficient degassing.
AquaMix SP Substrate unit
The Aquamix SP substrate unit also operates with a mixing tank for precise EC and pH control, as well as efficient degassing.
Autofill SP Batch
At businesses, like test stations and seed multiplication companies, they often work with different formulas.
AquaMix Substrate Regulation
For companies that work with a formula with a corresponding EC and pH, which requires little adjustment, the AquaMix Substrate Regulation is a highly usable unit.
AquaMix Substrate Unit
Water dispensing units
The AquaMix substrate unit operates with a mixing tank for precise EC and pH control, as well as efficient degassing.
Features of the AquaMix Substrate Unit:
- Equipped with process control;
- Touch screen operation with visual process display and potential remote control;
- Stable EC and pH control through the use of a mixing tank with a mixing regulation;
- Efficient degassing;
- Reliable operation due to durable components;
- Accurate and hassle-free dosing of fertilizers;
- High operational reliability;
- Minimal wear;
- Optionally, multiple mixing tanks to quickly switch to a different formula.
- Control possible from Hoogendoorn / Priva / Ridder or Sercom computer;
The A/B solutions are drawn from the A/B fertilizer tanks by a mixing/dosing pump and dosed into the mixing tank through a valve block. The same applies to the acid or alkali solution. At the same time, the mixing tank is filled with a mixture of fresh water (rainwater, R.O. water, well water, or tap water) and possibly drain water. The nutrient water with the correct formula, the right EC, and the appropriate pH is then filtered and pumped to the greenhouse or to the nutrient water silo.
Contact us for more information about the AquaMix Substrate Unit.
AquaMix SP Substrate unit
Water dispensing units
The Aquamix SP substrate unit also operates with a mixing tank for precise EC and pH control, as well as efficient degassing.
Features of the AquaMix SP Substrate Unit:
- Equipped with process control;
- Touch screen operation with visual process display and potential remote control;
- Stable EC and pH control through the use of a mixing tank with a mixing regulation;
- Efficient degassing;
- Recording of the individually dosed fertilizers;
- No more A/B fertilizer tanks needed, resulting in a quick switch to a different formula;
- Reliable operation due to durable components;
- Accurate and hassle-free dosing of fertilizers;
- High operational reliability;
- Minimal wear;
- Optionally, multiple mixing tanks to quickly switch to a different formula;
- Control possible from Hoogendoorn / Priva / Ridder or Sercom computer.
The individual liquid fertilizers are directly drawn from the storage containers with liquid fertilizers by a mixing/dosing pump according to a recipe set on the PLC. Each individual fertilizer is then dosed into the mixing tank through electric valves and flow sensors. At the same time, the mixing tank is filled with a mixture of fresh water (rainwater, R.O. water, well water, or tap water) and possibly drain water. The nutrient water with the correct formula, the right EC, and the appropriate pH is then filtered and pumped to the greenhouse or to the nutrient water silo.
The desired formulas are entered into the PLC of the AquaMix SP Substrate Unit. The EC and pH control still occurs via the process computer (e.g., Hoogendoorn), where the process computer for the EC control and the pH control sends a higher or lower adjustment respectively to the PLC on the AquaMix SP Substrate Unit. The individually dosed fertilizers in the mixing tank are measured and recorded on the PLC of the AquaMix SP Substrate Unit.
If the grower dissolves the used solid fertilizers individually in separate storage bins, the AquaMix SP Substrate Unit can draw the liquefied fertilizers from these storage containers. In this way, the AquaMix SP Substrate Unit can also be used if the grower does not have liquid fertilizers. This allows the grower the ability to quickly switch between different recipes with a fairly simple installation. Moreover, the grower retains control over the amount of fertilizers that are dosed. In Zambia and Kenya, we have already commissioned several of these installations.
Contact us for more information about the AquaMix SP Substrate unit.
Autofill SP Batch
Water dispensing units
At companies, such as test stations and seed propagation companies, work is often done with different recipes.
Features of the AquaMix Substrate Control:
- Equipped with process control;
- Touch screen operation with visual process display and possible remote control;
- Stable EC and pH control using a nutrient water silo with a mixing regulation;
- Good degassing;
- Always nutrient water in stock for 24 hours. This gives peace and stability to the grower;
- Preparation of small amounts of nutrient water with a very precise fertilizer dosing;
- No mixing of recipes when switching to another recipe;
- Reliable operation through durable parts;
- Accurate and hassle-free dosing of fertilizers;
- High operational reliability;
- Low wear;
Moreover, the water supply per department is very limited, but with a very precise fertilizer dosing, which is why conventional units cannot be used. For this specific market, Infa Techniek has developed an AquaFill SP Batch unit.
The AquaFill SP Batch unit also uses a mixing tank for precise EC and pH control and for good degassing. The individual liquid fertilizers are directly drawn from the storage tanks containing liquid fertilizers by a mixing/dosing pump according to a recipe set on the PLC. Each individual fertilizer is then dosed into the mixing tank through a centrally located flow sensor. At the same time, the mixing tank is filled with a mixture of fresh water (rainwater, R.O. water, spring water, or tap water) and possibly drain water. The AquaFill SP Batch unit prepares a batch ranging from 300 liters up to 10,000 liters in the mixing tank. Subsequently, the batch is transferred to one or more nutrient water silos.
The desired recipes, along with their corresponding EC and pH values, are entered on the PLC of the AutoFill SP Batch unit. The EC and pH adjustments are made via the PLC on the AutoFill SP Batch unit.
This batch unit can therefore operate stand-alone without the help of the climate computer. The individually dosed fertilizers in the mixing tank are measured and recorded on the PLC of the AutoFill SP Batch unit.
Contact us for more information about the AutoFill SP Batch unit.
AquaMix Substrate Regulation
Water dispensing units
For businesses that work with a recipe with corresponding EC and pH values that require minimal adjustments, the AquaMix Substrate Regulation is an excellent usable unit.
Features of the AquaMix Substrate Regulation:
- Equipped with process control;
- Touch screen operation with visual process display and possible remote control;
- Stable EC and pH control through the use of a nutrient water silo with a mixing system;
- Good degassing;
- Always have nutrient water in stock for 24 hours. This provides peace and stability for the grower;
- Reliable operation through durable parts;
- Accurate and hassle-free dosing of fertilizers;
- High operational reliability;
- Low energy consumption;
- Low wear;
- Control possible from Hoogendoorn / Priva / Ridder or Sercom computer.
The AquaMix Substrate Regulation operates with a nutrient water silo as a mixing tank. The nutrient water silo ensures proper degassing and precise EC and pH control.
The A/B solutions are drawn from the A/B fertilizer bins by a mixing/dosing pump and dosed into the nutrient water silo via a valve block. The same applies to the acid or alkali solution. At the same time, the nutrient water silo is filled with a mixture of fresh water (rainwater, R.O. water, spring water, or tap water) and, if necessary, drain water. The nutrient water with the correct recipe, the right EC, and the right pH is then pumped to the greenhouse using a drip pump and a filter.
Contact us for more information about the AquaMix Substrate Regulation.
